Pushed Type Thermoplastic road marking paint machine

pushed thermoplastic road marking paint machine paint charging: 100kgs Glass beads Charge:10kgs Liner wideth: 10/15/20/30cm

Pushed type thermoplastic road marking machine

website:www.6road.net

SPECIFICATION & OPERATIONAL MANUAL:

content of barrel for paint: 100kgcontent of barrel for micro glass beads: 10kgpyrogenation system: liquid petroleum gasliner wideth: 10cm 15cm 20cm or 30cmdimension: 110*90*95cm/wood bracket packingGross weight: 225kg

Component

glass beads switchfire tubehandle for door of road paintglass beads barrelroad marking liner handlegas pressure reducing valveglass beads valvefire-jet head valve of paint barrelbeside fire-jet head valvedown fire-jet head valveback wheel location poleroad paint outletglass beads sewerfront fire-jetroad marking box.direction of fire-jet blow the road marking boxbeatercoverthermoplastic paint barrelarrow location screwhead polearrow position regulation screwattached connectorarrow

OPERATION PROCESS

PREPARATION

Put down the arrow (24), push the machine to the position ready to paint, loosen the arrow location screw (20), align the arrow to the sample line, screw down the location screw (20) for location, regulate the higher/lower screw to adjust the position screw(22) on the right height of the arrow to ground.

Put the gas bottle onto the position for it, connect the gas pressure reduce equipment (6) with gas bottle, ignite the fire tube, aim the fire-jet at back side fire-jet(14), turn on the fire-jet valve (9) on the left side of thermoplastic machine, light the fire-jet head of road marking paint box, after ignition, aim the fire tube at the bottom of the road marking paint box bottom(16), turn on the fire-jet head valve (10) on the left side of road marking machine, light the fire-jet heads on the bottom of road marking box., put the fire tube into the road paint barrel from road paint door (12), turn on the fire-jet head valve (8) on the left of road marking machine, light the road paint barrel fire-jet heads, open the cover (18), put the thermoplastic paint from heating kettle into the paint barrel(19), open the glass beads box (4), fully filled with glass beads, turn on glass beads valve (7), the glass beads will flow to glass beads sewer (13).

CONSTRUCTION

Aim the arrow (24) of road marking machine at the sample line, use your foot to adjust the location by back wheel location pole (11), put down the road marking box (15) and press down the road paint open/shut handle(3), make the road paint flow out from road paint door by road paint outlet down to road marking box (15). Press down the road marking liner handle (5) when 75% of the road marking box are filled with thermoplastic paint. Turn on the glass beads open/shut handle (1), push the road marking machine, to marking the road paint.

CONSTRUCTION FINISHING

Use out all the thermoplastic paint in the barrel, turn off all the fire-jet valve

Clean the thermoplastic paint in the road marking box

ROAD MARKING THICKNESS CONTROL

ROAD MARKING BOX DRAWINGS ABOVE

inner hex screwback platehex nutcut plateregulation plateduck mouth plate

loosen the screw(1) on the back plate (2), move the back plate (2) up for thick, down for thinner. After regulation fix the inner hex screw (1)

FOR BOTH COLOR OF WHITE AND YELLOW THERMOPASTIC PAIN.

OUR TOTAL SUPPLY ROAD MARKING EQUIPMENT AND MATERIAL

cold solvent spraying road marking machine RP-C-1

double spraying liner

PH-D-2 thermoplastic paint pre heater

mechnism type

2*300kgs of paint charge

RP-B-1 thermoplastic paint cross line road marking machine

thermoplastic road marking machine RP-T-1

RP-C-6 cold spraying road marking machine vehicle bone type

4 spraying liners.

Thermoplastic road marking paint white yellow or OEM color

PH-S-1 thermoplastic paint pre heater single heating kettle.

CX-2 Road Marking Removal Machine

PH-D-3 thermoplastic paint pre heater

Hydrulic type

Double heating kettle 2*500kgs of paint charge

Pushed Type Thermoplastic road marking paint machine